Carbon block cartridges are designed for highly effective filtration of water for certain VOC’S, pesticides, chlorine, odor test & sediment reduction down to 5 microns. These cartridges are manufactured entirely from FDA compliance materials. They are suitable for potable water filtration, as well as several industrial, commercial & food service applications.
Its nominal filtration rating makes it an excellent option for polishing filters of pre-filters in applications which requires very fine filtration. These cartridges are effective at filtering giardia & Cryptosporidium cysts from potable drinking water.
- High lodine value.
- High flow rate.
- High dirt holding capacity.
- Greater chlorine removal efficiency.
- Good Oil adsorption medium.
Type of carbon filters
- Activated coal carbon
- Coconut shell carbon
|» Filter media||Bonded Powdered activated carbon|
|» End caps||Polypropylene|
|» Outer wrap||Polypropylene|
|» Gaskets||Buna N|
|» Sizes||10”, 20” 30”, 40”|
|» Micron Rating||5, 10 Micron|
|» Standard Outside Diameter||64mm , 116 mm|
|» Inner Diameter||28 mm|
|» Food & Beverages||Bottled water, Flavors, Polishing Lines|
|» Pharmaceuticals||Membrane prefilter|
|» Water Treatment||Membrane Protection, Resin Trap|
|» Edible Oil||Mineral Oil|
|FCI||ACE||Diameter of cartridge||Micron Rating||Length Of Cartridge|
|Activated Coal Carbon||68 MM||001 Micron||10″ Length|
|115 MM||005 Micron||20″ Length|
|010 Micron||30″ Length|
|025 Micron||40″ Length|