|
 |
|
Cartridge Filter Housing |
|
| Cartridge filter system offers wide range of flow capacities & contaminant holding capacities. Cartridge filter housing diameters can accommodate from 1 to 200 cartridges around. Cartridge filters are normally used as polishing filter in almost all process industries. Cartridge filter is constructed of filter housing, filter cartridges, tube sheet, positive sealing arrangement for cartridge depending upon type of cartridge & choice of end connections. Positive sealing arrangement for cartridge filter assures no particle migration or fiber migration, even after high differential pressures. |
|
| Operation |
|
| Contaminated fluid enters the housing and is distributed evenly around the filter cartridges. Filtration takes place from outside to inside. Solids are collected on the outside of filter cartridges & clear filtrate collected at outlet. |
|
| Features & Benefits |
|
| • |
Low pressure drop |
| • |
High dirt holding capacity |
| • |
zero hold up design |
| • |
Permanently piped housing are opened without special tools and without disturbing the piping |
| • |
Machined cover gasket groove provide positive O-Ring sealing |
| • |
Easy clean ability |
| • |
In-line inlet and outlet high flow rates |
| • |
Positive sealing arrangement to avoid bypassing |
| • |
Suitable for double open end (DOE), Code 7 (226 O-Ring) & 222 O-Ring type filter cartridge |
| • |
accommodates 10", 20", 30", 40", 50” & 60” long filter cartridges. |
| • |
End connections for ¾" to 24" pipe |
| • |
V posts or threaded center posts |
| • |
Quick opening tri clovers design |
| • |
Easy to operate & low maintenance |
| • |
Low down time |
| • |
Flow rate up to 2000 m3/hr |
| • |
Custom design services |
| • |
Housings are permanently piped |
| • |
All housings made from SS 316 l, SS 316 & ss304 are mirror polished & electro polished to resist adhesion of dirt and scale |
| • |
Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel |
| • |
ASME code stamp available |
| • |
Duplex / Triplex / Jacketed cartridge filter unit designs are available |
| • |
High temperature & high pressure design are available |
|
|
| Special Options |
|
• Sanitary fittings and construction
• Higher pressure rating
• Housings of alloy steel
• Corrosion allowances
• Steam jackets
• Special outlet locations
• Optional cartridge sealing methods
• 226, npt, etc
• High temperature gasket designs |
|
| Technical Specifications |
|
Sizes (Cartridge filter housings suitable for)
• 1 No. To 200 Nos. Of Cartridges in Single Housing
• 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge
• 10” , 20” , 30” , 40” , 50” & 60” Long Filter cartridge
Flow Rate
• Capacity: Up to 2000 m3 /hr
Material of construction
• SS 316L
• SS 316
• SS 304
• CARBON STEEL (ALL GRADE)
• MILD STEEL
• ALLOY METALS
• POLYPROPYLENE
• LEAD LINING on Any Metal
• RUBBER LINING on Any Metal
• TEFLON LINING on Any Metal
• TEFLON coating on any metal
Cartridge filter housing suitable for filter cartridges of
• Double Open End (DOE) Type
• Code 7 (226 O Ring) Design
• Code 3 (222 O Ring) Design
• NPT Threaded Connection Type
Gasket / O Ring Material
• Neoprene
• Nitrile
• Silicone
• Viton
• Buna N
• EPDM
• PTFE
End connections available
• NPT / BSP Threaded
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
• Tri Clover Adaptors
• SMS /Dairy End Connection |
|
| Applications |
|
| • Pharmaceuticals |
• Petroleum Derivatives |
| • Water Treatment |
• Coolants |
| • Paints & Inks |
• Food & beverages |
| • Bore Well water |
• Dairy |
| • Dyes & Intermediates |
• RO Pre filtration |
| • Processing Chemicals |
• & Many More |
|
|
Hygienic Filter Housing |
|
| Hygienic filter housing is manufactured from 316 stainless steel to the highest quality. These are suitable for a variety of liquid filtration applications designed to fit standard 222 'O' Rings & 226 O Ring cartridges. They have an integral bayonet locator providing an efficient seal between housing and cartridge. Wide range available offers 1, 3, 5 and 12 round configurations in 10", 20", 30" and 40" length cartridge, depending on type. Their hygienic design ensures low product hold-up reducing product loss. |
|
| Features & Benefits |
|
• Integral cartridge location
• Low product hold-up
• Easy access for cleaning
• Steam sterilisable
• EPDM seals
• Quick release housing clamp
• Hygienic clamp pipe fittings
• Full range of sizes
Hygienic filter housing can be steam sterilized in-situ in accordance with cartridge parameters. All housings are supplied with support legs, enabling free standing or in-line installation. |
|
| Technical Specifications |
|
| • Material of Construction |
Ss 316l (stainless steel SS 316 l) |
| • Connections |
Hygienic clamp type |
| • Surface treatment |
Mirror polished & electropolished |
| • Cartridge fitting |
222 ‘o’ ring / 226 O Ring (bayonet fit) |
| • Maximum operating pressure |
7 BARG (102 psig) |
| • Housing closure seal |
EPDM / silicone ‘O’ Ring for single cartridge EPDM / silicone square O Ring for multi cartridge |
|
| |
Addition Features
| • |
Alternative connection types are available such as Table-E, Table-F, ASA 150#, and DIN. |
| • |
Standard seal materials are EPDM. Silicone or Viton options are available. |
| • |
A full range of pipe accessories are available such as clamps, seals, ferrules and hose liners. |
|
|
| Applications |
|
| • Food |
| • Dairy |
| • Beverage |
| • Electronics and Pharmaceutical Industries |
|
|
|
| |
Manufacturer & Exporters of Filter Systems & Consumables for Liquid, Air & Gas Filtration |
|
 |
|
|
| |
 |
|
|